HighlightsAutomatic wavelength selection
Easy handling/Backlit display
User interface in German, English,French, Spanish, Italian, Portuguese (BR), Polish & Indonesian
Storage
More than 120 methods/35 user defined methods/Infrared interface
Waterproof/Mobile
DescriptionAL400
With the modern design of the AL400 we have succeeded in combining the mobility of a portable photometer with the characteristics of a modern laboratory photometer.
This new unit covers all the important parameters of water analysis, from aluminium to zinc. The high level of accuracy of AQUALYTIC reagents and the user-friendly nature of the instrument guarantee rapid and reliable analysis of your water samples. Depending on the application, the unit will operate with tablet reagents, powder packs, liquid reagents or tube tests (16 / 13 mm).
The AL400 operates with 6 interference filters and uses long-life LEDs as a light-source. No moving parts are involved. The illuminated display allows comfortably reading of the measurement results even in low light conditions. Of course, the AL400 has a memory, in which up to 1000 data sets can be stored. The infra-red interface* enables data to be transmitted to a computer or printer (RS 232 / USB).
* available as an option : IRiM (infra-red interface module)
N.I.S.T. Traceability
DThe instrument has a factory calibration, which is related to internal standards, which are not N.I.S.T traceable. The instrument may be calibrated by the user in a “user calibration mode” with N.I.S.T traceable standards.
(N.I.S.T. = National Institute of Standards and Technology)
Polynomials
With the help of an external mathematical program, the corresponding polynomial is created from data pairs (concentration/absorption). A known polynomial may also be used. 25 order polynomials (y = A+Bx+Cx2 +Dx3 +EX4 + FX5) can be stored together with user-specific parameters such as wavelength, measuring range, unit and number of decimals.
Concentration
This function can be used to measure 2 to 14 known standards. On the basis of the concentrations/absorption pairs obtained, the photometer will calculate a linear interpolation between the measured points. Up to 10 methods can be stored for further sample measurements.
Delivery Content
The instrument is supplied complete and ready-to-use incl. 4 batteries, 3 vials ø 24 mm, 3 vials ø 16 mm, 1 adapter each for 16 mm and 13 mm vials, stirring rod 13 cm, brush 11 cm, screw driver, guarantee sheet, certificate of compliance, instruction manual, carrying case with water resistance foam, but without reagents.
Order code: 4214020
Please specify the reagents or parameters required at time of order.
Infra-red data transmission modul IRiM
The IRiM (infra-red interface modul) uses modern infra-red technology to transmit measurement data from the AL400 photometer to one of 3 optional interfaces. These interfaces can be used to connect to a PC, a USB printer1) or alternative a serial printer2). The interface which is selected is displayed by an LED function indicator. The user can switch between the interfaces using the „Select“ button.
The unit is supplied complete with data logging software providing easy and rapid transfer of data to the PC. As an option the data can be saved as an Excel sheet or a .txt file. Measurement data can quickly be printed out, using a specified1) USB or alternative a printer with a serial plug-in connected to the IRiM.
1) USB printer: HP Deskjet 6940
2) each ASCII printer
Delivery content: The IRiM is delivered ready for use, with the following accessories: USB cable, 4 batteries, screwdriver, CD-ROM, operating instructions and guarantee certificate
دستگاه فوتومتر آکوالیتیک آلمان پرتابل
برای اندازه گیری پارامترهای مختلف عناصر محلول درآب بسیار سریع
مناسب برای آزمایشگاهها / کارخانجات/ پروژه های تحقیقاتی
دارای قرصهای مختلف بسته به رنج اندازه گیری مواد محلول بسیار متفاوت میباشدتوصیه میشود فایل ضمیمه را دقیق مطالعه فرمائید
ضد آب و صفحه نمایش بزرگدارای کیف حمل صحرایی